60 | H |
Tank Removal
Fig. | Fig. |
In order to gain full access to the Circulation Pump / Motor, Heater Assembly and Aqua Sensor the Tank must be removed.
To remove the Tank, start by removing the Outer Door, Left and Right Side Panels, and Toe Kick, leaving the unit as shown in Fig.
Next, disconnect the Upper Wiring Harness from the Control Unit and On/Off Switch, and then bring the harness off its mounting point on the Condensation Tube, Fig.
Now from inside the dishwasher remove the Lower Spray Arm, Filter Basket and Screen, then remove the two screws that attach the Feeder Tube to the Sump, item 1. And the two Sump Clamps, item 2.
1
2
Fig.
