H
Fig.
Fig.
55
NTC Removal
Now, from inside the dishwasher remove the Lower Spray Arm, Filter Basket and Screen, then remove the two screws that attach the Feeder Tube to the Sump, item 1. And the two Sump Clamps, item 2.
With all steps complete, bring the Tank up from the Base and insert a block in the rear of the unit between the Tank and the Base.
With the block in place you now have the required access to replace the NTC.
Service note: The Circulation Pump / Motor can also be replaced at this time, see Section 8.
Fig.
