H | 23 |
Interior Features
Fig. | Fig. | Fig. | ||
The Upper Rack Rails are made | To remove the Rail, disengage | The Upper Rack Guide Rollers | ||
of stainless steel with a plastic | the End Cap by applying | are permanently attached to the | ||
end cap. | outward pressure to the Cap’s | Tank and cannot be removed or | ||
| top tab, unclipping it from the | repaired. | ||
| Rail. Then slide the Rail out from |
| ||
| the Guide Rollers. |
| ||
|
|
|
|
|
|
|
|
|
|
Fig.
The Door Gasket is press fit into a channel molded around the Tank.
Note: Two inches of overlap are left at each end of the Gasket to insure a proper seal.
Fig.
To remove the Gasket, simply pull it away from the Tank Channel.
To replace, press the ribbed end firmly into the channel until secure. No sealant or glue is required.
Service tip: To test for a bad Door Gasket, open the dishwasher door and insert a dollar bill, then close the door and pull the bill out. If the bill is snug the Gasket is good, if the bill slides out easily the Door Gasket may need to be replaced.
