Bradford-White Corp MITW -10, MITW -12 / -15 manual Operation could occur if these devices are not

TTW1 Universal Service

Replacement Blower

MITW -12 / -15 Series

Step 20. If it has not already been done, remove the old vent adapter from the existing vent pipe.

Step 21. If necessary, re-route the vent pipe such that it can be properly seated in the top portion of the vent adapter.

Step 22. Be sure that both clamps on the vent adapter are firmly tightened, securing the blower, vent adapter, and vent pipe together.

Step 23. Double-check all vent connections.

Step 24. Restore electrical power to the water heater.

Step 25. On the water heater’s gas control, turn the power switch to the “On” position.

Plug power cord back into outlet.

Turn switch on gas valve to “On” position.

Warning:	Check all safety devices to make sure they
	are working properly. Improper water heater
	operation could occur if these devices are not
	functioning properly.

Page 20