126Routine Maintenance

Clean the Printhead and Platen Roller

Caution • The printhead may be hot and can cause severe burns. Allow the printhead to cool.

Caution • Before touching the printhead assembly, discharge any built-up static electricity by touching the metal printer frame or by using an anti-static wriststrap and mat.

To clean the printhead and platen roller, complete these steps:

1.Open the printhead assembly by rotating the printhead-open lever (1) counter-clockwise.

1

2.Remove the media and ribbon (if loaded).

14068L-001 Rev. A

X-Plus II User Guide

1/11/07