Operations 33

Prepare the Media for Loading

Figure 17 • Bottom Feed Without Using Media Supply HangerTo load fanfold media, complete these steps:

1.Thread the fanfold media through the rear or bottom access slot.

2.Do you wish to use the media supply guide?

If…

Then…

 

 

No

Continue with the media loading procedure for the desired print mode.

Yes a. Slide out and flip down the media supply guide.

b.Drape the media over the media supply hanger.

3.Flip up the media supply guide, and then slide it in until it touches the edge of the media.

1/11/07

X-Plus II User Guide

14068L-001 Rev. A