Brady X-Plus II Remove Used Ribbon, To remove used ribbon, complete these steps:

46Operations Load Ribbon

12.Push down the printhead assembly (1), and then rotate the printhead-open lever (2) clockwise until it locks into place.

21

Remove Used Ribbon

Remove used ribbon from the ribbon take-up spindle each time you change the roll of ribbon.

To remove used ribbon, complete these steps:

1.Has the ribbon run out?

If the ribbon...	Then
Ran out	Continue with the next step.
Did not run out	Cut or break the ribbon before the ribbon take-up spindle.

14068L-001 Rev. A X-Plus II User Guide 1/11/07