180Specifications

Print Specifications by Model

Print Specifications by Model

Refer to the key and the table that follows for printer specifications.

Specifications Key

Non-Continuous printing (gap, notch, or hole between labels).

Continuous printing (no gap, notch or hole).

ŠLadder (rotated) orientation.

—Picket fence (nonrotated) orientation.

Print Specifications

BP-300X-Plus II

BP-600X-Plus II

BP-360X-Plus II

 

 

 

 

Printhead resolution

300 dots/inch

600 dots/inch

300 dots/inch

 

(12 dots/mm)

(24 dots/mm)

(12 dots/mm)

 

 

 

 

Dot size

0.0033×0.0033 in.

0.0016×0.0016 in.

0.0033×0.0033 in.

(width×length)

(0.84×0.084 mm)

(0.042×0.042 mm)

(0.84×0.084 mm)

 

 

 

 

First dot location

0.023 ± 0.035 in.

0.023 ± 0.035 in.

0.10 ± 0.035 in.

(measured from inside

(0.6 ± 0.9 mm)

(0.6 ± 0.9 mm)

(2.5 ± 0.89 mm)

media edge)

 

 

 

 

 

 

 

Maximum print width

4.09 in. (104 mm)

3.2 in. (81 mm)

6.6 in. (168 mm)

 

 

 

 

Selectable print speeds

2.4, 3 through 8

1.5, 2 through 4

2.4, 3, 4, 5, 6, 7, 8

(inches per second)

 

 

 

 

 

 

 

Maximum Print length

39 in. (991 mm)

39 in. (991 mm)

39 in. (991 mm)

 

100 in. (3810 mm)

39 in. (991 mm)

100 in. (3810 mm)

 

 

 

 

Bar code modulus (X)

3.9 mil to 39 milŠ

1.6 mil to 16 milŠ

3.9 mil to 39 milŠ

dimension

3.33 mil to 33 mil—

1.6 mil to 16 mil—

3.33 mil to 33 mil—

 

 

 

 

Thin film printhead with

Yes

Yes

Yes

Element Energy Equalizer

 

 

 

(E3)®

 

 

 

14068L-001 Rev. A

X-Plus II User Guide

1/11/07