
8.4 User Mode | 8 |
|
Print Tab
The [Print] tab is used to configure the printer controller.
Default Setting
This screen appears when you click the [Default Setting] menu on the [Print] tab. Clicking a
General Setting
This screen appears when you click the [General Setting]
Using PageScope Light Chapter 8
Input Tray: | From the |
| device receives a print job that does not specify the paper feed |
| tray, the default paper feed tray is used. |
| Settings: Auto, Tray1, Tray2, Tray3, Tray4, or LCC |
Duplex: | From the |
| printing by default. If you select duplex printing, select whether |
| to use long edge binding or short edge binding. If the device |
| receives a print job that does not specify the duplex setting, the |
| default duplex setting is used. |
| Settings: Off, Left Binding, or Top Binding |
Copies: | Enter the default number of copies. If the device receives a print |
| job that does not specify the number of copies, the default |
| number of copies is used. |
| Settings: 1 to 999 |
[Apply] button: | Click the button to apply the new settings. |
[Clear] button: | Click the button to clear the settings that were entered or |
| selected. |
CF2002/CF3102 |