Breadman CF2002, CF3102 user manual Engine Setup Items, Selecting the Required Function

Before Making Prints Chapter 3

3 3.4 Selecting the Required Function

[Functions] menu		Submenu
Resume Printing
Shut Down		Restart Server
		Shut Down System
		Reboot System
Run Setup		This command is used to enter the Setup mode of the printer controller.
		(For more details, refer to the manual included with the printer
		controller.)
Run Diagnostics		This command is used to run the diagnostic function. (For details, refer
		to the manual included with the printer controller.)
Calibration		This command is used to perform the calibration. (For more details, refer
		to the manual included with the printer controller.)
Engine Setup		Tray1 Setup
		Special Paper
		Output Tray
		Crisscross
		Low-Power Mode
		Sleep Mode
		Life Counter Clear
		Screen Patern
Engine Setup Items
Items	Setting
Tray 1 Setup	This function is used to specify the size of paper loaded in Tray 1.
Special Paper	This function is used to specify that the paper loaded in Tray 2, Tray 3 or Tray 4
	is special paper. If the Special Paper is specified for any drawer, the paper is not
	automatically selected with paper setting “Auto Paper” or with 2-sided printing.
Output Tray	This function is used to select the first priority of Output Trays.
	This function can be set only if the Finisher (FN-116) is installed.
Crisscross	This function is used to set whether or not prints will be sorted in crisscross
	pattern if the necessary conditions are met while using the “Sort” mode.
Low-Power Mode	This function is used to activate or deactivate the Energy Saver Mode.
	If this mode is set to “On”, select the length of time after the last operation until
	the printer automaticaly enters the Energy Saver Mode.
Sleep Mode	This function is used to activate or deactivate the Sleep Mode.
	If this mode is set to “On”, select the length of time after the last operation until
	the printer autotmaticaly enters the Sleep Mode.
Life Counter Clear	This function is used to reset the Life Counter value of the parts to “0”.
Screen Pattern	This function is used to select the type of Screen Pattern.

3-12 CF2002/CF3102