3

3.6 Turning the Printer Controller On and Off

 

 

3.6Turning the Printer Controller On and Off

To turn on the printer controller

Set the power switch to “1”.

Chapter 3

Before Making Prints

After the printer controller is turned on, the controller is initialized. After the controller has finished warming up, the Ready light lights up in green and “Info XXXX” appears in the display.

However, a print operation is not performed until the printer has finished warming up (after about 5 minutes at normal room temperature (68 °F/20 °C)).

To turn off the printer controller

Note

If the printer controller is turned off in a manner other than described in “To turn off the printer controller”, the controller may be damaged.

1 Check that “Info XXXX” appears in the

 

display, and then press the [Menu] key in the

 

printer panel.

 

3-16

CF2002/CF3102

Page 39
Image 39
Breadman CF2002, CF3102 user manual Turning the Printer Controller On and Off, To turn on the printer controller