Breadman CF3102, CF2002 user manual Installation Precautions, Installation Site, Power Source

2.1 Installation Precautions 2

2 Precautions

2.1Installation Precautions

Installation Site

To ensure utmost safety and prevent possible malfunctions, install the printer in a location that meets the following requirements.

-A location away from curtains, etc. that may catch fire and burn easily

-A location that is not exposed to water or other liquids

-A location free from direct sunlight

-A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures

-A well-ventilated location

-A location that is not exposed to high humidity

-A location that is not extremely dusty

-A location not subjected to undue vibrations

-A stable and level location

-A location where ammonia or other organic gases are not generated

-A location that does not put the operator in the direct airflow of exhaust from the printer

-A location that is not near any kind of heating devices

Power Source

The power source requirements are as follows.

Voltage fluctuation: Maximum ±10%

(AC 127 V areas only: Between –10% and +6%)

Frequency fluctuation: Maximum ±0.3%

❍Use a power source with as little voltage or frequency fluctuations as possible.

Precautions Chapter 2

CF2002/CF3102 2-1