Breadman CF2002, CF3102 user manual Expanded memory is not installed, automatic double-sided

3

3.1 Components and Their Functions

Before Making Prints Chapter 3

	10				7
					8
					9
No.	Part Name			Description
7	Duplex Unit AD-14 (optional)	Turns over prints, allowing double-sided prints to be made
		automatically.
		• If a printer controller (CN3102e) and the duplex unit are
			installed on the printer, the memory must be expanded. If the
			expanded memory is not installed, automatic double-sided
			printing cannot be performed.
		Referred to as the duplex unit throughout the manual
8	Paper Feed Unit	Equipped with a paper drawer that can supply 500 sheets of
	PF-118 (optional)	paper; up to two paper feed units can be installed.
		Referred to as the paper feed unit throughout the manual
9	Copy Table CT-2 (optional)	A paper feed unit can be set up on the copy table, and then the
		printer can be set up on the top.
		By setting up the printer on the copy table, the printer can be
		placed on the floor instead of on a desk, keeping the entire
		surface of the desk free.
		Referred to as the copy table throughout the manual
10	Finisher FN-8 (optional)	Finishes prints according to the selected finishing mode
		(sorting, stapling, hole-punching or binding), then feeds out the
		pages
		• The hole-punching function is only available if the optional
			punch kit (PK-4) is installed onto finisher FN-8. If the finisher
			is installed, the printer must be installed on the copy desk, on
			the large capacity cabinet or over a paper feed unit combined
			with the copy table.

3-2 CF2002/CF3102