55.5 When the Message “Punch dust full Please change” Appears
5-42 CF2002/CF3102
Printer Panel Messages Chapter 5
5.5 When the Message “Punch dust full Please
change” Appears
If the punch kit PK-4 is installed in the finisher FN-8, the above message will appear
when the hole-punch waste container is full with punch scraps.
To empty the hole-punch waste container
Empty the hole-punch waste container, and then re-install it according to the
following procedure.
1Slide the finisher away from the
printer.
2Pull out the hole-punch waste
container.