Loading Paper Chapter 4

 

4

4.5 Loading Paper

 

 

5Load the paper into the drawer so

that the side of the paper to be printed onto (the side facing up when the package was un- wrapped) faces up.

6 When making manual double-sid- ed prints, load the paper so that the second side (the blank side) faces up.

Note

If the paper is curled, flatten it before loading it.

Do not load so much paper that the top of the stack is higher than the Ä mark.

Do not load more than 21 sheets of special paper.

Before loading envelopes, press them down to make sure that all air is removed, and make sure that the folds of the flaps are firmly pressed, otherwise the envelopes may become wrinkled or a paper misfeed may occur.

When loading additional paper, remove any paper remaining in the drawer, place it on top of the new paper, and then align the paper in the stack well before loading it into the drawer. We recommend replenishing the paper only after all of the paper in the drawer has been used, otherwise a paper misfeed may occur.

4-8

CF2002/CF3102

Page 53
Image 53
Breadman CF2002, CF3102 user manual Loading Paper