OPERATING your Breville Duo-Temp™ espresso machine
Step 1 - filling the water tank
•Ensure the Power On/Off button is ‘Off’ and the Selector Control is set to the ‘•’ Standby position.
•Remove the plug from the power outlet.
•Remove the Filter Holder if locked into the Brew Head and move the Steam Wand to the side of the machine.
•Remove the Water Tank by pulling with the handle insert in the front of the Espresso Machine.
•When the Water Tank is removed, a black tube slides and extends out from the Water Tank storage area. Do not touch or try to remove this tube, it will automatically slide back into position when the Water Tank is reinserted.
•Fill the Water Tank with cold water to the maximum mark on the Water Window and slide the Water Tank carefully back into position in the machine.
NOTE
Check the water level before use and replace the water daily.
The water tank should be refilled with fresh cold water before each use.
Do not fill with any other liquid.
Step 2 - Preparing the coffee
•Place the 1 or 2 cup filter into the Filter Holder (use the smaller filter for 1 cup and the larger filter for 2 cups).
•Use 1 level measure of ground espresso coffee for the 1 cup filter and 2 level measures for the 2 cup filter. It is important to use the correct amount of coffee for each Filter as the filter perforations have been constructed to utilise the pressure in the machine to extract optimal flavor with each brewing. (Refer to The Grind on Page 22).
15
