care & cleaning
CLEANING THE FILTERS, FILTER HOLDER AND BREWING HEAD
•The stainless steel Filters and Filter Holder should be rinsed under water directly after use to remove all coffee particles. Should the fine holes in the filters become blocked, the fine pin on the Cleaning Tool can be used to clear the holes.
•The Brew Head interior should be wiped with a damp cloth to remove any ground coffee particles.
•Periodically run water through the machine with the Filter Holder in place, but without any ground coffee, to rinse out any residual coffee particles.
CLEANING THE OUTER HOUSING / CUP WARMING PLATE
•The outer housing and cup warming plate can be cleaned with a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).
CLEANING THE DRIP TRAY
•The Drip Tray should be removed, emptied and cleaned at regular intervals, particularly when the Drip Tray Full Indicator is showing full.
•Remove the Drip Tray Full Indicator and Grid from the Drip Tray, wash with warm soapy water, using a
•If further cleaning is required the full indicator can be removed from the drip tray by releasing the side snaps.
CLEANING THE STORAGE TRAY
•The Storage Tray can be removed after the Drip Tray is removed then cleaned with a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).
NOTE
Do not clean any of the parts or accessories in the dishwasher.
26
