Brocade Communications Systems 53-1002580-01 manual Ethernet Cabling, Equipment Checklist

2 Ethernet Cabling

Ethernet Cabling

To ensure proper operation when installing the switch into a network, make sure that the current cables are suitable for 10BASE-T, 100BASE-TX or 1000BASE-T operation. Check the following criteria against the current installation of your network:

•Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP) cables with RJ-45 connectors; Category 3 or better for 10BASE-T, Category 5 or better for 100BASE-TX, and Category 5, 5e or 6 for 1000BASE-T.

•Protection from radio frequency interference emissions

•Electrical surge suppression

•Separation of electrical wires (switch related or other) and electromagnetic fields from data based network wiring

•Safe connections with no damaged cables, connectors or shields

FIGURE 9 RJ-45 CONNECTIONS

1

1. RJ-45 Connector

Equipment Checklist

After unpacking this switch, check the contents to be sure you have received all the components. Then, before beginning the installation, be sure you have all other necessary installation equipment.

Package Contents

•Brocade Brocade 6910 Ethernet Access Switch switch

•Four adhesive foot pads

•Bracket Mounting Kit containing two brackets and eight screws for attaching the brackets to the switch

•Console cable (RJ-45 to DB-9)

10	Brocade 6910 Ethernet Access Switch Hardware Installation Guide
	53-1002580-01