Brocade Communications Systems RFS4000, RFS6000, RFS7000 manual

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 225
53-1001931-01
Global Configuration commands 5
•When the access list is applied on an Ethernet port, it becomes a port ACL
•When the access list is applied on a VLAN interface, it becomes a router ACL
•When the access list is applied on a WLAN index, it becomes a WLAN ACL
A MAC access list (to allow arp), is mandatory for both port and WLAN ACL’s. For more information
on how to configure a MAC access list, see permit on page 499.
Example
The example below creates a standard access list (ACL) to permit any traffic coming to the
interface:
RFController(config)#access-list 1 permit any
RFController(config)#
The example below creates a extended IP access list to permit IP traffic between two networks:
RFController(config)#access-list 101 permi t ip 192.168.1.0/24 192.168.2.0/24
RFController(config)#
The example below creates a extended access list to permit tcp traffic, between two networks, with
destination port range between 20 and 23:
RFController(config)#access-list 101 permit t cp 192.168.1.0/24 192.168.2.0/24
range 20 23
RFController(config)#
The example below denies icmp traffic from any source to any destination:
RFController(config)#access-list 115 deny icmp any any
RFController(config)#access-list 115 permi t ip any any
RFController(config)#