Brocade Communications Systems RFS4000, RFS6000, RFS7000 client-identifier

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 513
53-1001931-01
DHCP Config commands 17
client-identifier
DHCP Config commands
Assigns a name to the client-identifier
A client identifier is used to reserve an IP address for a DHCP client.
Supported in the following platforms:
•Mobility RFS4000 Controller
•Mobility RFS6000 Controller
•Mobility RFS7000 Controller
Syntax
client-identifier <identifier>
Parameters
Example
RFController(config-dhcp)#client-identifie r testid
RFController(config-dhcp)#
client-identifier
<identifier>
Prepends a null character. Use \\0 at the beginning (a
single \ in the input is ignored)