Brocade Communications Systems RFS4000, RFS6000, RFS7000 manual hold-time

776 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
smart-rf config commands
25
hold-time
smart-rf config commands
Defines the number of seconds to disable interference avoidance after a detection
This prevents a radio from changing channels continuously.
Supported in the following platforms:
•Mobility RFS4000 Controller
•Mobility RFS6000 Controller
•Mobility RFS7000 Controller
Syntax
hold-time <30-65535>
Parameters
Example
RFController(config-wireless-smart-rf)#hol d-time 400
RFController(config-wireless-smart-rf)#
hold-time <30-65535> The number of seconds to disable interface avoidance after a
detection. This prevents the radio from changing channels
continuously. Set the values in seconds from 30-65535.