Brocade Communications Systems RFS4000, RFS6000, RFS7000 - page 692

690 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
kdc
[password|realm|server]
Modifies KDC related parameters.
•password [0 <secret>|2 <secret>|<secret>] – Create a KDC
server password (up to 127 characters)
•0 <secret>– Password is specified unencrypted.
•2 <secret>– Password is encrypted with a
password-encryption secret.
•<secret> – Defines a KDC server password (up to 127
characters).
•realm <realm> – Defines a KDC realm (up to 127
characters).
•<realm> – Defines KDC realm (up to 127 characters)
•server [primary|secondary|timeout] – Modifies KDC server
parameters.
•primary <IP> {auth-port <port>} – Defines the primary
KDC server.
•secondary <IP> {auth-port <port>}– Defines the
secondary KDC server.
•<IP> – Sets the KDC server IP address
•auth-port <port> – Optional. Sets the KDC server
authentication port to a value in the range 1 to
65535. Default is 88.
•timeout <1-60> – Modifies KDC server parameters.
•<1-60> – Defines the time the controller waits for
a response from the KDC Server before retrying.
mobility enable Enables L3 Mobility on WLAN(s).
client-client-disallow Disallows frames from one wireless client to another wireless
client on this WLAN.
nac-mode
[bypass-nac-except-include-l
ist|
do-nac-except-exclude-list|n
one]
Sets the Network Access Control (NAC) mode configuration
•bypass-nac-except-include-list – No Client NAC check is done
except for those in include list. Devices in the include list
have NAC checks.
•do-nac-except-exclude-list – A Client NAC check is done
except for those in the exclude list. Devices in the exclude list
will not have any NAC checks.
•none – NAC disabled, no NAC is done. An Client can only get
authenticated by a Radius server.