650 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Wireless configuration commands
20
base-bridge [enable|
max-clients <1-12>]
Sets base bridge values
•enable – Allows the given radio to act as a base bridge and
accept connections from client bridges.
•max-clients <1-12> – Configures a base-bridge. Enter
maximum client bridges allowed.
beacon-interval
<50-200>
Sets the beacon interval (in K-uSec)
bridge-fwd-delay <4-30> Sets the STP bridge forward delay (in seconds)
•<4-30> - Time in seconds
bridge-hello <1-10> Sets the STP bridge hello (in second s)
•<1-10> - Time in seconds
bridge-max-ageout
<4-3600>
Sets the STP bridge maximum ageout (in seconds)
•<4-3600> - Time in seconds
bridge-msg-age <6-40> Sets the STP bridge message age (in seconds)
•<6-40> - Time in seconds
bridge-priority
<0-65535>
Sets the STP bridge priority (in seconds)
•<0-65535> - Priority value
bss [<1-4>|add-wlans|
auto] <wlans>
Maps WLANs to radio BSSIDs
•<1-4>– Sets the BSS where WLANs are mapped
•add-wlans <wlans> – Adds new WLANs to existing radios.
The other WLANs on the radios are left as is.
•auto <wlans> – Sets the automati c assignment of a BSS . The
user selects WLANs, and the system assigns them to a BSS
automatically.
•<wlans> – Defines a list (1,3,7) or range (3-7) of WLAN
indices. When a BSS is also specified, the first W LAN is used
as the primary WLAN. When the auto option is used, the
system automatically assigns the first four WLANs as
primaries on their respective BSSIDs.
channel-power
[indoor|outdoor]
[<1-200>|acs|random]
Sets the location, channel and transmit power level
•indoor [<1-200>|acs|random]– Defines an indoor location
•<1-200> <4-20> {[lower|upper]} – Defines the channel
number
•<4-20> – Power in dBm
•lower – Lower channel width mode
•upper – Upper channel width mode
•outdoor [<1-200>|acs|random]– Defines an out door
location
•<1-200> – Sets the channel number
•<4-20> – Sets the power in dBm
•acs <4-20> {[20 MHz | 40 Mhz]} – Enables ACS (auto
channel selection). A radio will scan for the least
congested channel at startup or controller
reconfiguration.
•random <4-20> {[20 MHz | 40 Mhz]} – Random
channel selection