Brocade Communications Systems RFS4000, RFS6000, RFS7000 controller

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 725
53-1001931-01
RTLS config commands 21
controller
RTLS config commands
Configures the controller’s geographical location parameters
Supported in the following platforms:
•Mobility RFS4000 Controller
•Mobility RFS6000 Controller
•Mobility RFS7000 Controller
Syntax
controller [coordinates|geo-coordinates]
controller coordinates x <0-65535> y <0-65535> z <0-65535>
controller geo-coordinates longitude <-180.00-80.00>
latitude <-90.00 - 90.00>
Parameters
Example
RFController(config-rtls)#controller coord inates x 121 y 121 z 135
RFController(config-rtls)#
RFController(config-rtls)#controller geo-coordinates longitude 120 latitude 70
RFController(config-rtls)#
coordinates x <0-65535> y
<0-65535> z <0-65535>
Configures controller coordinates within the site
•x <0-65535> – Configures X coordinate
•y <0-65535> – Configures Y coordinate
•z <0-65535> – Configures Z coordinate
longitude <-180.00-80.00>
latitude
<-90.00 - 90.00>
Configures controller geographic coordinates
•longitude <-180.00-180.00> – Configures longitude in
degrees
•latitude <-90.00-90.00> – Configures latitude in degrees