Brocade Communications Systems RFS4000, RFS6000, RFS7000 ap-location

802 Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
53-1001931-01
Role config commands
26
ap-location
Role config commands
Sets the AP location configuration
•This requires the location engine to be enabled on the controller with a site, appropriate zones
defined and AP co-ordinates defined. The role based firewall has to know which zone the Client
is located when it associates for the ap-parameter option to work.
•The ‘ap-location’ parameter defines the zone or zones you wish to match.
Supported in the following platforms:
•Mobility RFS4000 Controller
•Mobility RFS6000 Controller
•Mobility RFS7000 Controller
Syntax
ap-location [any|contains|exact|not-contains ]
ap-location any
ap-location contains <WORD>
ap-location exact <WORD>
ap_location not-contains <WORD>
Parameters
Example
RFController(config-role)#ap-location any
RFController(config-role)#
RFController(config-role)#ap-location contai ns office
RFController(config-role)#
RFController(config-role)#ap-location exact wa rehouse
RFController(config-role)#
RFController(config-role)#ap-location not-co ntains office
RFController(config-role)#
any Defines any AP location.
contains <WORD> AP location contains the string <WORD>.
exact <WORD> AP location contains the exact string <WORD>
not-contains <word> AP location does not contain the string <WORD>