Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 713
53-1001931-01
RTLS config commands 21
ekahau
RTLS config commands
Enables and configures the external ekahau location engine
Supported in the following platforms:
Mobility RFS4000 Controller
Mobility RFS6000 Controller
Mobility RFS7000 Controller
Syntax
ekahau [enable|engine ip<IP> port<Port>|multicast-listen-addr<MAC>]
Parameters
Use [no] enable and [no] engine <ip><port> to undo theekahau RTLS engine configuration
and disable it.
Example
RFController(config-rtls)#ekahau enable
RFController(config-rtls)#
RFController(config-rtls)#ekahau engine ip 10.1.1.1 port 1001
RFController(config-rtls)#
RFController(config-rtls)#ekahau multicast-listen-addr 01-18-8E-00-00-00
RFController(config-rtls)#
enable Enables and configures external ekahau RTLS engine
engine ip<IP> port <Port> Configures the IP address and port number of the external ekahau
RTLS engine
ip – Configures external location engine IP address
port <1000-9000> – Configure external location engine port
multicast-listen-addr <MAC> Configures multicast MAC address to which ekahau tags packets
are destined
<MAC> – Multicast MAC address