Brocade Communications Systems RFS4000, RFS6000, RFS7000 rate-limit

Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide 655
53-1001931-01
Wireless configuration commands 20
rate-limit
Wireless configuration commands
Sets the default rate limit per user in kbps, and applies to all enabled WLANs
Supported in the following platforms:
•Mobility RFS4000 Controller
•Mobility RFS6000 Controller
•Mobility RFS7000 Controller
Syntax
rate-limit [wired-to-wireless|wireless-to-wired] <0-100000>
Parameters
Usage Guidelines
Use {no} rate-limit [wired-to-wireless|wireless-to-wired] to remove the rate limit
applied to the group
Example
RFController(config-wireless)#rate-limit w ired-to-wireless 1000
RFController(config-wireless)#
RFController(config-wireless)#rate-limit w ireless-to-wired 20000
RFController(config-wireless)#
wired-to-wireless
<100-100000>
Down link direction from network to wireless client
•<100-100000> – rate in the range of <100-100000> kbps
wireless-to-wired
<100-100000>
Up link direction from wireless client to network
•<100-100000> – rate in the range of <100-100000> kbps