Brother 3200c Paper Type, Using the Options Key

Using the Options Key

Use the Options key to set number of copies, paper type, paper size, brightness, enlargement/reduction ratio and special copy options for the next copy only.

Press	Menu Selections	Options		Factory
Options					Setting
	OPT:#OF	NO. OF COPIES:XX		01
	COPIES01
	OPT:PAPER TYPE	PLAIN/INK JET/GLOSSY		PLAIN
		(4-COLOR or 3-COLOR)/
		TRANSPARENCY
	OPT:PAPER SIZE	LETTER/LEGAL/A4/		LETTER
		POST CARD: 4" ⋅ 6"
	OPT:QUALITY	NORMAL/BEST/FAST		NORMAL
	OPT:BRIGHTNESS	-	+	-		+
	OPT:ELG/RDC	50%/78% LGL>LTR/		100%
		94% A4>LTR/100%/
		104% EXE>LTR/150%/
		200%/ZOOM
	OPT:SPECIAL	OFF (1 IN 1)		OFF (1 IN 1)

Paper Type

You can change the paper type setting for the next copy only.

1Place the original face down in the ADF.

2Use the dial pad to enter the number of copies you want (up to 99).

3	Press Options and press or to select OPT:PAPER TYPE, and then press
	Menu/Set.
4	Press or to select the type of paper you are using (PLAIN, INKJET,

GLOSSY or TRANSPARENCY), and then press Menu/Set.

5If you selected GLOSSY, press or to select 4-COLORor 3-COLOR, and then press Menu/Set.

Note The print quality of black ink varies depending on the kind of glossy paper you are using. Black ink is used when you select 4-COLOR. If the glossy paper you are using repels the black ink, select 3-COLOR, which simulates black ink by combining the three ink colors.

6 Press Black Copy or Color Copy—OR—Press or for additional settings.

12 - 3 M A K I N G C O P I E S