10 10Remote Fax Options

(Not Available for Color Faxes)

Fax Forwarding/Paging

You cannot use Paging and Fax Forwarding at the same time.

You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON, your MFC stores the received fax in memory. Then it dials the fax number you’ve programmed and forwards the fax message.

1Press Menu/Set, 2, 5, 1.

2Press or until the LCD shows

FAX FORWARD?, and then press

Menu/Set.

3The LCD prompts you to enter the fax number where faxes will be forwarded. Enter the forwarding number (up to 20 digits), and then press Menu/Set.

1.FAX FWD/PAGING

FWD#:

4Press Stop/Exit.

Programming Your Pager Number

When Paging is selected, your MFC dials the pager number you’ve programmed, and then dials your Personal Identification Number (PIN); this activates your pager so you will know that you have a fax message in the memory.

1Press Menu/Set, 2, 5, 1.

2Press or until the LCD shows PAGING?, and then press Menu/Set.

3Enter your pager phone number (up to 20 digits) followed by # #, and then press Menu/Set. Do not include the area code if it is the same as that of your MFC. For example, 1 8 0 0 5 5 5 1 2 3 4 # #.

1.FAX FWD/PAGING

PAG#:

R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S )

10 - 1