Brother 3200c Hold, Pause, Fax Redial

A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S

8 - 7

Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to try again. Anytime you want to make a second call to the last number dialed, press Redial/Pause to save time.

If you’re sending a fax automatically and the line is busy, the MFC will redial automatically up to three times at 5 minute intervals.

You can replace the handset without disconnecting the call.

Press Hook/Hold to place a call on Hold.

1

2

3 Pick up the MFC handset. (Picking up an extension telephone handset will not release the call from Hold.)

■ If the memory is full, press Stop/Exit to abort the job or if more than one page has been scanned, press Black Fax Start to send the portion that is in the memory.

1 Place the original face down in the ADF.

2 Enter a number using One Touch, Speed Dial, a Group number, Search or the dial pad.

Example: Group number

3 Press Menu/Set. You will be prompted to press the next number.

4 Enter the next number. Example: Speed Dial

5 Press Menu/Set.

6 Enter the fax number.

Example: Manual dialing using the dial pad.

7 Press Black Fax Start.

Your MFC will read the original into memory and then start sending faxes to the numbers you entered.

Pause

Press Redial/Pause to insert a 3.5 second pause between numbers. If you are dialing overseas, you can press Redial/Pause as many times as needed to increase the length of the pause.

Hold