N OT I C E

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or electronic device to send any message via a telephone fax machine unless such messages clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machines or such business, other entity or individual.

In order to program this information into your MFC, complete the steps described on page 5-2.

If you do not enter a fax number, no additional information can be entered.

Setting the Ring Volume

1 Press Menu/Set, 1, 5, 1.

1.RING

2Press or select (OFF, LOW or HIGH), and then press Menu/Set.

3Press Stop/Exit.

—OR—

You can adjust the ring volume when your MFC is idle. You can turn the ring OFF or you can select a ring volume level.

Press or to adjust the volume level. With each key press, the MFC rings so

you can hear the active setting as the LCD shows it. Each key press changes the volume. The new setting will remain until you change it again.

Setting the Beeper Volume

You can set the beeper to LOW, HIGH or OFF. The default setting is LOW. When the beeper is set to LOW or HIGH, the MFC beeps every time you press a key or make an error and when fax sending or receiving is finished.

1 Press Menu/Set, 1, 5, 2.

2.BEEPER

2Press or to select your option.

3When the LCD shows the option you want, press Menu/Set. Press Stop/Exit.

I N I T I A L S E T U P

5 - 4