Brother HL-2060 ESC, Dec, Hex, Code, Format:, Codabar, ■Bar Code Mode, Bar Code Control, Interleaved 2 of, CODE 39 (default), Print Bar Codes or Expanded Characters

GEBRUIKERSHANDLEIDING

Bar Code ControlThe printer can print bar codes in the HP LaserJet, EPSONFX-850, and IBM Proprinter XL emulation modes.Print Bar Codes or Expanded Characters

Code	ESC i
Dec	27 105
Hex	1B 69
Format:	ESC i n … n \

Creates bar codes or expanded characters according to the segment of parameters “n … n”. For further information about parameters, see the following “Definition of Parameters.” This command must end with the

“\ ” code (5CH). [Definition of Parameters]

This bar code command can have the following parameters in the parameter segment (n … n). Since parameters are effective within the single command syntax ESC i n … n \, they don’t take effect in the subsequent bar code commands. If certain parameters are not specified, they take the default settings. The last parameter must be the bar code data start (“b” or “B”) or the expanded character data start (“l” or “L”). Other parameters can be specified in any sequence. The prefix of each parameter can be a lower-case or upper-case character: for example, “t0” or “T0”, “s3” or “S3”, etc.

■Bar Code Mode

n = “t0” or “T0” n = “t1” or “T1” n = “t3” or “T3 ” n = “t4” or “T4 ” n = “t5” or “T5” n = “t6” or “T6” n = “t9” or “T9” n = “t12” or “T12” n = “t13” or “T13” n = “t14” or “T14”

n = “t130” or “T130” n = “t131” or “T131” n = “t132” or “T132” n = “t133” or “T133” n = “t134” or “T134”

CODE 39 (default)

Interleaved 2 of 5

FIM (US-Post Net) Post Net (US-Post Net) EAN 8, EAN 13, or UPC A UPC E

Codabar

Code 128 set A Code 128 set B Code 128 set C ISBN (EAN)ISBN (UPC-E) EAN 128 set A EAN 128 set B EAN 128 set C

This parameter selects the bar code mode as above. When n is “t5” or “T5”, the bar code mode (EAN 8, EAN 13, or UPC A) varies according to the number of characters in the data.

Appendix–68