Brother BE-438F, KE-430F manual 19

2. SPECIFICATIONS

No.		No. of holes	Pattern	No. of	No. of	No. of	Sewing size (mm)
					crossover
		in button		threads		stitches	X	Y
					stitches
64	*1			6-6	1	18	3.4
21	*3			6-6	1	19
34	*3			10-10	1	27
22	*3*4			6-6	0	24		3.4
							2.4
43	*3*5			6-6	0	24
35	*3*4	4		10-10	0	32
44	*3*5			10-10	0	32
46				6-7	1	19
47				8-9	1	23	3.4	3.4
48				10-11	1	27
49				12-13	1	31

*1 Use for buttons with small holes.

*3 Do not use the button lifter spring.

*4 When sewing of one side is completed, the button clamp rises and the thread is trimmed. To finish sewing, press the foot switch until sewing of the other side starts, or press the foot switch again after sewing of the other side is completed.

*5 When sewing of one side is completed, the thread will be trimmed without the button clamp rising, and then the other side will be sewn.

For shank button

No.	Pattern	No. of threads	No. of	Sewing size (mm)
			stitches	X	Y
50		6	12
51		8	14
				3.4	0
52		10	16
53		12	18

Note when creating additional sewing patterns

When sewing data with a small number of stitches (15 stitches or less) is sewn repeatedly (short cycle operation), the upper shaft motor may overheat and the “E150” error code may be generated.

KE-430F, BE-438F 10