7. SEWING

7. SEWING

CAUTION

Turn off the power switch at the following times, otherwise the machine may operate if the foot switch is depressed by mistake, which could result in injury.

￿When replacing the needle and bobbin

￿When not using the machine and when leaving the machine unattended

Use threading mode or turn off the power first in order to carry out threading.

Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in personal injury or damage to the machine.

7-1. Sewing

2342B

1st step

2nd step

4441Q

2384B

1.Turn on the power switch.

2.Press the or key (1) to select the number for the program to be sewn.

3.Depress the foot switch to the 2nd step.

The feed mechanism will move to the home position.

4.Set the material under the work clamp (2).

(For the BE-438F, insert the button and place the material under the button clamp (3). (Refer to “4-7. Inserting the button”.)

5.Depress the foot switch to the 1st step.

The work clamp (2) / button clamp (3) will be lowered.

6.Depress the foot switch to the 2nd step. The sewing machine will start sewing.

7.Once sewing is completed and the thread has been trimmed, the work clamp (2) / button clamp (3) will rise.

4116M

55

KE-430F, BE-438F