![](/images/backgrounds/53283/53283-9041x1.png)
4. PREPARATION BEFORE SEWING
(Front)
(Back)
3.For sewing patterns with a short bar tack length (10 mm or less), the end of the thread that is being held by the thread nipper may poke out from the seam on the underside of the material. It is recommended that you change the thread nipper setting to "OFF" for patterns such as these.
4.If error [E690] or [E691] frequently occurs, remove the needle plate and remove any thread scraps from underneath the needle plate.
Upper thread
4487Q
5.With the
Refer to
<Program No. Reference Table>
Specifications | Standard pattern No. | Pattern No. for | |
thread nipper device | |||
|
| ||
| 1 | 65 | |
| 4 | 66 | |
For | 5 | 67 | |
8 | 68 | ||
materials | 13 | 69 | |
| 15 | 70 | |
| 20 | 71 | |
| 21 | 72 | |
| 2 | 78 | |
| 3 | 79 | |
For | 6 | 80 | |
14 | 81 | ||
16 | 82 | ||
| 17 | 83 | |
| 18 | 84 | |
| 19 | 85 | |
| 7 | 73 | |
For knitted wear | 9 | 74 | |
22 | 75 | ||
For foundation garments | |||
31 | 76 | ||
| |||
| 32 | 77 |
32 |