3. INSTALLATION
3. INSTALLATION
CAUTION
Machine installation should only be carried out by a | All cords should be secured at least 25 mm away | ||||||
qualified technician. | from any moving parts. Furthermore, do not | ||||||
Contact your Brother dealer or a qualified electrician | excessively bend | the cable | or | secure | it too | firmly | |
staples, otherwise | there is | the | danger | that | fire or | ||
for any electrical work that may need to be done. | |||||||
electric shocks could occur. |
|
|
|
| |||
The sewing machine head weighs approximately 57 |
|
|
|
| |||
Be sure to connect the | ground. If | the ground | |||||
kg. The installation should be carried out by two or | |||||||
connection is not secure, you run the risk of receiving | |||||||
more people. | |||||||
a serious electric shock, and problems with correct | |||||||
Do not connect the power cord until installation is | |||||||
operation may also occur. |
|
|
|
| |||
complete, otherwise the machine may operate if the | Install the safety covers to | the | machine head and | ||||
foot switch is depressed by mistake, which could | |||||||
result in injury. | motor. |
| |
Hold the machine head with both hands when tilting it |
|
back or returning it to its original position. |
|
Furthermore, after tilting back the machine head, do |
|
not push the face plate side or the pulley side from |
|
above, as this could cause the machine head to |
|
topple over, which may result in personal injury or |
|
damage to the machine. |
|
3-1. Table processing diagram
•The thickness of the table should be at least 40 mm, and it should be strong enough to bear the weight and vibration of the sewing machine.
•Check that the control box is at least 10 mm away from the leg. If the control box and the leg are too close together, it may result in incorrect sewing machine operation.
2453B
11 |