3. INSTALLATION
3-4. Installing the machine head
Pulse motor
Solenoid
Approx. 20mm
Approx. 20mm
2282B
(1)Pins [2 pcs]
(2)Set screws [2 pcs]
(3)Rubber cushion assembly [2 pcs]
Place the machine head gently on top of the table.
NOTE:
•Be careful not to clamp any cords between the machine head and the table.
•When holding the machine head, do not hold it by the pulse motor or the solenoid, otherwise it may damage the pulse motor or solenoid.
(4) Hinge holders [2 pcs]
(5) Bolts [4 pcs]
(6) Plain washers [4 pcs]
(7) Spring washers [4 pcs]
(8) Nuts [4 pcs]
(9) Rubber cushions [3 pcs]
(10) Collar [3 pcs]
(11) Plain washers [3 pcs]
(12) Screws [3 pcs]
(13) Felt
(14) Oil tube
Pass the felt (13) and the oil tube (14) through the hole in the dust oiler setting plate (15) into the oiler (16).
Figure
2284B
13 |