3. INSTALLATION
3-2. Installing the control box
3-3. Installing the oiler
Center
Remove the six screws (1), and then remove the control box cover (2).
(3)Control box
(4)Bolts [4 pcs]
(5)Plain washers [4 pcs]
(6)Spring washers [4 pcs]
(7)Nuts [4 pcs]
2280B
Before installing the oiler, provisionally install the rubber cushion (1) and the hinge holder (2) to the table with the two bolts (3).
(4)Dust oiler setting plate
(5)Dust oiler
(6)Screws [2 pcs]
(7)Wood screws [2 pcs]
(8)Oiler
*Install the dust oiler setting plate (4) so that the hole (9) in the dust oiler setting plate (4) is in the center of the hole (10) in the table for installing the oiler (8) as shown in figure [A].
NOTE:
•Make sure that the dust oiler setting plate (4) does not interfere with the hinge holder (2).
2281B
12 |