5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-3. Copying programs

To create a program with parameters that are almost exactly the same as those of another program, you can copy the original program and change just the parts which need to be changed.

1

Select the program number to be used for creating

Carry out steps 1 and 2 in “5-2. Program setting method”

 

the new program.

to select the program number to be used for creating the

 

 

new program.

 

 

 

 

 

• Select a program number from 200 to 999.

 

 

For example, to create

 

 

 

 

 

program number 300:

 

 

 

 

 

2410B

 

 

 

 

 

 

 

 

2

Switch to program copy mode.

While pressing the F1 key (1), press the F4 key (2).

 

 

 

• “CoPy” will be displayed in the menu display, “PG”

 

 

will be displayed in the SECTION No. display, and the

 

 

number of the program containing the original data will

 

 

be displayed in the TENSION display.

 

 

 

• The displays will not appear in this way unless a

 

 

program number from 200 to 999 has been selected

 

2411B

as the new program number.

 

 

 

 

 

 

3

Select the program containing the original data.

Press the

or

key (3) to change the number of

 

 

 

 

the program containing the original data.

 

 

 

• The value in the TENSION display will flash.

 

 

 

• If you press the RESET key, you can cancel the copy

 

 

operation and return to program mode.

 

 

For example, to copy

 

 

 

 

 

program number 12:

 

 

 

 

 

2412B

 

 

2382B

2383B

 

 

 

 

 

4

Copy the program.

Press the ENTER key.

 

 

 

 

• All parameters in the program will be copied, and the

 

 

sewing machine will then return to the status in step 3

 

 

of “5-2. Program setting method”.

 

 

2413B

 

 

 

2414B

 

 

 

5

Change the necessary parameters.

Carry out the steps from step 4 onward in “5-2. Program

 

 

setting method” to change the necessary parameters.

KE-430F, BE-438F

40