Brother BE-438F, KE-430F 6-5.Using cycle programs

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)

6-5. Using cycle programs

Sewing patterns that have been recorded in user programs can be recorded in up to 30 cycle programs (C01 to C30). One cycle program can contain up to a maximum of 50 steps (St1 to St50).

When sewing the sewing patterns in a certain order, it can be useful to record them in a cycle program beforehand.

<Recording method>

1	Switch to cycle program recording mode.		While pressing the TEST key, press the				key (1).
							2436B 2382B
			￿￿The cycle program number (C01 to C30) will be
			displayed in the PROGRAM No. display, the step
			number (St1 to St50) will be displayed in the menu
			display, and the program number will be displayed in
			the TENSION display.
	2435B	TEST indicator flashes	￿￿If no program has been recorded for a step, ‘---‘ will
			be displayed for that step.
2	Select a cycle program number.		Press the	or	key to select the cycle			program
			number that you would like to use.
			• ‘St 1’ will be displayed.
	2437B	TEST indicator flashes
3	Select the program number to be recorded in step 1.		Press the	or	key (2) to display		the	program
			number to be recorded in the TENSION display (3).
			￿￿If the value is changed, the display will change to
			flashing.
			￿￿To cancel	the	recording, keep	the	RESET		key
			pressed for more than 2 seconds so				that	‘---‘	is
			displayed.
		TEST indicator flashes				2438B 2382B 2383B
4	Apply the program setting.		Press the ENTER key.
								2414B
			￿￿The display will change from flashing to illuminated,
			and this means that the setting has been applied.
			￿￿If you press the		/ keys (4), the	/	keys (5) or
			the TEST key without pressing the ENTER key, you
			can cancel the parameter changes.

49 KE-430F, BE-438F