9. STANDARD ADJUSTMENT
< Thread wiper racking width adjustment >
1. Remove the side cover.
2. Loosen the set screw (1) and adjust so that the distance from the thread wiper to the center of the needle is as shown in the illustration.
Approx. 25 mm Approx. 20 mm
2336B | 4683Q |
9-13. Checking the machine head switch
1. Turn on the power switch.
2. Check that no error numbers appear on the operation panel.
<If error [E050], [E051] or [E055] is displayed>
If the machine head switch (1) is not turned on, error [E050], [E051] or [E055] will occur.
Use the screw (2) to adjust the installation position of the machine head switch as shown in the illustration.
2295B
71 |