Brother MFC-7750, MFC-6650MC 101, Setting Maximum Time for Incoming Messages, Setting Toll Saver

M E S S A G E C E N T E R 101

See

Setting

Ring Delay

p. 40

Setting Maximum Time for Incoming Messages

Your MFC comes set to receive voice messages up to 30 seconds long. You can change this setting to any length from 20 seconds to 60 seconds, in 5-second increments. This setting also applies to the Memo.

1Press Function , 1 , 8 , 4 . The screen prompts you to select a maximum time.

MESSAGE 30 SEC?

SELECT & SET

2Press or to select the maximum time setting for incoming messages.

3Press Set when the screen displays your setting.

4Press Stop to exit.

Setting Toll Saver

When you set the toll saver feature, the MFC answers after four rings if you don’t have messages, and after two rings if you do have messages. This way, when you call the MFC, if it rings three times, you know you have no messages, and can hang up, avoiding any toll charge.

When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off for the MFC to operate using your Ring Delay setting.

1 Press Function , 1 , 2 , 1 .

2Press or to select TOLL SAVER (or RING DELAY).

3Press Set when the screen displays your selection.

4Press or to select ON.

5Press Set .

6Press Stop to exit.

ICM Recording Monitor

This feature lets you turn OFF (or ON) the speaker volume for voice messages. When you turn the monitor OFF, you will not hear messages as they come in.

1 Press Function , 1 , 8 , 5 .

2Use or to select OFF (or ON).

3Press Set when the screen displays your selection.

4 Press Stop to exit.