U S I N G T H E M U L T I - F U N C T I O N L I N K P R O S O F T W A R E

139

 

 

 

Receiving Faxes into your PC

See

Connecting the

MFC to Your

Computer

p. 111

See

Installing the

Brother

Software

p. 119

To receive faxes into your PC through the MFC, you must first have connected your MFC to your computer. Then, you can load the software.

Before You Begin

Use the following checklists for the MFC and PC, to make sure you have properly set up the MFC and PC to work together.

Checklist for the MFC to Make Sure MF Link Mode is Active

To receive faxes into your computer, MF Link mode must be set to ON and your computer must be turned on with the Multi-Function Link Pro Software running. If your PC is turned off at Multi-Function Link Pro is closed, incoming faxes will be printed at the MFC automatically.

Set MF Link mode to OFF if you want all incoming faxes to be printed at the MFC.

1 Press Function , 1 , 2 , 0 .

2Use or to select ON (not OFF).

3Press Set .

4Press Stop to exit.

Checklist for Your PC

1In the Main Menu, select the Setup pull-down menu.

2Select Preferences...

3Under Answer Mode, select Fax only.

4Click the OK button.

5Make sure the MFC is connected to the parallel port of the PC.

6Keep the PC and the Multi-Function Link Pro Main Menu running at all

times.

Page 153
Image 153
Brother MFC-7750, MFC-6650MC manual Receiving Faxes into your PC, 139, Before You Begin, Checklist for Your PC