20

C H A P T E R T W O

 

 

Do not connect a TAD elsewhere on the same phone line—your MFC and TAD will both try to control the line.

Connections

The external TAD must be plugged into the left side of the MFC in the jack labeled EXT. Your MFC cannot work properly if you plug the TAD into a wall jack.

EXT

.

 

LINE

TAD

YES!

NO!

TAD

1Plug the telephone line cord from the wall jack into the left side of the MFC, in the jack labeled LINE.

2Plug the telephone line cord from your TAD into the left side of the MFC, in the jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD’s telephone line jack, and not its telephone set jack.)

3Set your external TAD to four rings or less. (The MFC’s Ring Delay setting does not apply).

4Record the outgoing message (see below).

5Set the TAD to answer calls.

6For MFC 6650MC only, set Message Storage ( Function , 1 , 8 , 1 ) to VOICE:EXT.

7Set the Answer Mode to MSG CTR (for MFC 6650MC only). Set the Answer Mode to TAD (for MFC 4350, MFC 4650 and MFC 7750 only). Press Mode until both FAX and FAX/TEL lights are on.

Page 34
Image 34
Brother MFC-6650MC, MFC-7750 manual Yes, Connections