Brother 7860DW, MFC-7360 manual 79

		Troubleshooting
Error Message	Cause	Action
Not Available	The requested function is not	Contact your administrator to check your
	permitted to all IDs by Secure	Secure Function Lock Settings.
	Function Lock 2.0.
Out of Memory	The machine’s memory is full.	Fax sending or copy operation in
		progress
		Do one of the following:
		 Press Start to send or copy the scanned
		pages.
		 Press Stop/Exit and wait until the other
		operations in progress finish, and then
		try again.
		 Clear the faxes from the memory.
		Print the faxes that are stored in the
		memory to restore the memory to 100%.
		Then turn off Fax Storage to avoid
		storing more faxes in the memory. (See
		Printing a fax from the memory in
		Chapter 4 of the Advanced User's Guide
		and Fax Storage in Chapter 4 of the
		Advanced User's Guide.)
		Print operation in process
		Do one of the following:
		 Reduce the print resolution. (See Basic
		tab in the Software User’s Guide.)
		 Clear the faxes from the memory. (See
		the above explanation.)
Print Unable XX	The machine has a mechanical	Do one of the following:
	problem.	 (For MFC-7360 and MFC-7460DN )
		Transferring your faxes or Fax Journal
		report on page 73 before disconnecting	B
		the machine so you will not lose any
		important messages. Then, disconnect
		the machine from the power for several
		minutes and then reconnect it.
		(For MFC-7860DW)
		Disconnect the machine from the power
		for several minutes, then reconnect it.
		 If the problem continues, call Brother
		Customer Service.
Replace Drum	It is time to replace the drum unit.	Replace the drum unit.
		(See Replacing the drum unit on page 63.)
	The drum unit counter was not	Reset the drum unit counter.
	reset when a new drum was	(See Replacing the drum unit on page 64.)
	installed.
		71