Brother 7860DW, MFC-7360 manual 80

Error Message	Cause	Action
Replace Toner	The machine will stop printing	If you have set the Toner setting to Stop,
	until you replace the toner	replace the toner cartridge with a new and
	cartridge.	unused original Brother toner cartridge. This
		will reset the Replace Toner mode. (See
		Replacing the toner cartridge on page 57.)
		If you have set the Toner setting to
		Continue, the machine will continue to
		print data until the LCD shows Toner
		Ended. For how to operate the machine in
		Continue mode, see Toner Settings in
		Chapter 1 of the Advanced User's Guide.
Scan Unable XX	The machine has a mechanical	 (For MFC-7360 and MFC-7460DN )
	problem.	See Transferring your faxes or Fax
		Journal report on page 73 before
		disconnecting the machine so you will
		not lose any important messages. Then,
		disconnect the machine from the power
		for several minutes and then reconnect
		it.
		(For MFC-7860DW)
		Disconnect the machine from the power
		for several minutes, then reconnect it.
		 If the problem continues, call Brother
		Customer Service.
Size Error DX	The paper in the tray is not a	Load A4 paper for automatic duplex printing,
	suitable size for automatic duplex	and then press Start. (See Print media
	printing.	on page 131.)
Size mismatch	The paper in the tray is not a	Load an appropriate size of paper in the
	correct size.	tray, and re-set the “Paper Size” (Menu, 1,
		2, 2). (See Paper Size on page 17.)
Toner Ended	It is time to replace the toner	Replace the toner cartridge with a new one.
	cartridge.	(See Replacing the toner cartridge
		on page 57.)
Toner Low	The toner is low.	Buy a new toner cartridge before you get a
		Replace Toner message.

72