10 - 1 MAKING COPIES
10

Using the MFC as a copier

You can use your MFC as a copier, maki ng up to 99 copies at a time.

Enter Copy mode

Before making copies, make sure that (Copy) is illuminated
in green. If it is not, press (Copy) to enter Copy mode. The
default setting is Fax. Yo u can change the number of seconds or
minutes that the MFC stay s in Copy mode after a copy operatio n.
(See Setting the Mode Timer on page 4-6.)
The printable area of your MFC begins at approxim ately 2 mm from
the both ends and 3 mm from the top or bottom of the paper.
Making copies
While the MFC is copying, incoming faxes will be received into
the memory instead of being printed.
3 mm
2 mm Not
copiable
area
Ex: A4 (Document) → A4 (Paper)