6 - 14 SETUP SEND
Broadcasting
Broadcasting is when the same fax message is automatically sent to
more than one fax number. Using the Set key, you can include
Groups, One-Touch, Speed-Dial numbers and up to 50 manually
dialled numbers. If you did not use up any of the numbers for Groups,
access codes or credit card numbers, you can ‘broadcast’ faxes to
as many as 382 different numbe rs. However, the available memory
will vary depending on the types of jobs in the memory and the
number of locations used fo r broadcasting. If you broadcas t to the
maximum numbers available, you will not be able to use Dual Access
and Delayed fax.
To include One-Touch or Speed-Dial numbers and manually dialled
numbers in the same broad cast, you must press Set betwee n each
of the numbers. Use Search/Speed Dial to help you choose the
numbers easily.
(See Setting up Groups for Br oadcasting on page 7-5.)
After the broadcast is finished, a Broadcast Rep ort will be printed to
let you know the results.
■Enter the long dialling sequenc e numbers as you would normally,
but remember that each One-T ouch and Speed-Dial number
counts as one number, so the number of locat ions you can store
becomes limited.
■If the memory is full, press Stop/Exit to stop the job or if more
than one page has been scanned, press Start to send the
portion that is in the memory.
1
If it is not illuminated in green, press (Fax). Place the
original document face down in the ADF.
2
Enter a number using One-To uch, Speed-Dial, a Group
number, Search or manual dialling using the dial pad.
(Example: Group number)