GETTING STARTED 4 - 12
Setting the Tray Use for Copy mode
If your MFC does not have the opt ional tray #2, you can skip this
setting. The default se tting of Auto allows *1your MFC to choose the
paper from the optional Tr ay #2 when paper is out in Tray #1 or
*2when the size of the original document will fit best on the paper in
Tray #2.
1
Press Menu, 1, 8.
2
Press or to select Tray#1
Only, Tray#2 Only or Auto.
3
Press Set.
4
Press Stop/Exit.
■*1 Copies will automatically be printed from Tray #2 only if
the Paper Size setting f or Tray #2 is the same as Tray #1.
■*2 Copies will automatically be printed from Tray #2 if the
Paper Size setting for Tray #2 is different than Tray #1 and
this paper size is more suitable for the scanned original
document.
General Setup
8.Tray Use:Copy