4 - 13 GETTING STARTED
Setting the Tray Use for Fax mode
If your MFC does not have th e optional tray #2, you can skip thi s
setting. The default setting of Auto allows your MFC to choose the
paper from the optional Tray #2 if Tray #1 is out of paper or if
incoming faxes will fit best on the paper in Tray #2.
1
Press Menu, 1, 9.
2
Press or to select Tray#1
Only, Tray#2 Only or Auto.
3
Press Set.
4
Press Stop/Exit.
Setting Tone or Pulse dialling m ode (Excluding the Nordic Countries)
Your MFC comes set for Tone dialling service (multi-frequency). If
you have Pulse dialling se rvice (rotary), you need to change t he
dialling mode.
1
Press Menu, 0, 5.
2
Press or to select
Pulse
(or Tone).
Press Set.
3
Press Stop/Exit.
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Red uction) on page 5-6.)
General Setup
9.Tray Use:Fax
Initial Setup
5.Tone/Pulse